Skip to content

Tips for External House Painting in Auckland

Painting the external part of your house can make it look so much prettier and more sophisticated. A good coat of paint can effectively protect the external walls of your home from natural things such as rain, wind, mildew, or mold. If you’re looking forward to painting the exterior of your home, don’t miss out on these tips and tricks.

Consider the weather

To carry out the painting process, you will have to prevent bad weather and do it during a dry and sunny week. Moisture is the artist’s worst enemy. Poured panels or concrete foundations will only cause bubbles and cracks in the painting a few months after reapplication. If you stay in an area with long wet springs, you should wait before carrying out the external painting project. If you stay in a humid and hot region, think about drier and colder weather.

west Auckland commercial painters

Beware of lead

The first thing to do anytime you want to tackle an external painting job is to remove any old cracked or damaged paint. Given your home was built before 1978, chances are some of these painting cups contain lead, a known neurotoxin that can seriously affect brain function and development, especially in children.

Even when you are not handling lead paint, it is important to keep clutter to a minimum and avoid breathing painting dust. Ensure you have a good respirator so that you can breathe well. Then invest in canvases like those used by professionals. Unlike the cheap plastic versions, they don’t break, and can be used over and over again. Place rags under your work area and cover bushes and other natural areas where they will not get dirty.

Beware of cracks

Painting the external of your home can be a painstaking process, but it creates the opportunity to take a close look at your house and look for any imperfections. When scraping off the edge of old paintings, pay attention to the condition of the

blinds, wood planks and window sills. If they are broken, cracked, or rotten parts, fix them now, so they don’t deteriorate over time.

If a piece of wood is rotten, it should be replaced. However,given that there are only a few cracks or holes, a professional-quality outdoor patch can be applied. No need to mix; just knead the pliable putty directly into the problem area; smooth in the opposite direction, let it dry, and then gently sand the surface. All wooden surfaces can be sanded to achieve a perfectly smooth surface. You can rent or borrow an electric sander to cover a larger area in less time and be less fatigued.

Wash before starting

It is important to clean the walls well before painting to remove any dirt, mold, or mildew, You can do this, do not use a pressure hose because it can pierce softer wood, but it is necessary to keep the walls clean and in good condition before repainting the walls.

In a nitshell, with these tips, You can surely do a great job and give your house fa├žade a dramatic look. Of course, be sure to choose the right color and also that it is the right paint for the exterior. When You are done, it will be very nice! You will be so excited at the end!